Advantages

adv3

Flash Pellet - Ecologist

Real wood pellet is produced from 100% wood sawdust and the raw material used is the recycling of sawdust and wood remaining after the production of pallets, packaging, lumber, joinery, etc. No trees are cut down for pellet production, forests are not destroyed. Branches broken in the forests and waste generated during pruning are valued. Thus, nature is purified from these wastes and resources are used in the most efficient way. Unlike energy sources such as fossil fuels, which are rapidly depleted and cause environmental pollution, the use of pellets protects the environment and economy at the maximum level.

Order Now
Contact Us
adv2

Flash Pellet - Clean and Safe

Pellet is an energy source that does not have any problems with smelling, rotting or dusting by turning wood into sawdust, removing moisture from it, and compressing it with high pressure to form pellets with a diameter of 6 mm and a length of 10-30 mm. Our products are packaged in 15 and 25 kilogram bags, and there is no harm to the carrier or the environment during transportation and storage. It is aesthetic, does not create an ugly appearance where it is stored, unlike coal, wood, etc. fuels, and does not contain harmful creatures such as mice, worms and insects. It is an energy source that does not harm the user or the environment and does not threaten human health, as its emission values are very low and it has almost no ash and smoke. In addition, advanced pellet burning systems are offered to the user with semi-automatic and fully automatic models, which turn off themselves like a combi boiler in unplanned situations such as a power outage, clean the chimney, ignite and take fuel into the combustion chamber, and remove ash when necessary. Safety measures are at the highest level, there are no problems such as burning back, smoking or poisoning.

Order Now
Contact Us
adv1

Flash Pellet - Economical

Pellets are produced by recycling 100% natural wood waste. It is an energy source that does not contain any chemical additives. In classical coal boilers, the efficiency is 70% and ash-slag is formed in the range of 20% - 50% depending on its calorific quality. Some of it is black smoke without being burned, that is, approximately 500-700 kilograms of 1 ton of coal taken can be converted into energy. Pellets are produced by removing moisture from the tree and pressing it at high pressure. Since it is compressed, the ash content is around 1%, in other words; Approximately 10 kg of ash comes out of 1 ton of pellets you burn, however, pellet burning systems operate at a high level (95%) efficiency, just like condensing combi boilers, which allows you to get maximum efficiency with minimum fuel.

Order Now
Contact Us

Flash Pellet Advantages

  • It is a sustainable resource.
  • It is acceptable in terms of environment and human health.
  • The amount of waste after use is very low.
  • It is less dangerous than the use of other fossil fuels.
  • It can be used in electrical energy production.
  • The cleanest combustion system among solid fuel systems is pellet burning systems.
  • Wood pellets are a refined biomass available anywhere in the world.
  • Wood pellets are very easy to transport.
  • It requires much less space for storage compared to wood.
  • No trees need to be cut down for commercial pellet production.
  • Pellet evaluates the waste of the forest.
  • In this respect, it contributes to the protection of forests against fire by collecting easily flammable forest residues.
  • Wood pellet heating systems are ozone friendly and are below acceptable CO emission thresholds according to the Kyoto Protocol.
  • In classical solid fuel systems, a significant amount of creosote (tar spirit) is formed in the chimneys.
  • In pellet systems, there is almost no creosote.
  • Therefore, it can be exhausted outside without a chimney(as in hermetic combi boilers).
  • There is no danger of poisoning like coal.
  • There will be no dust and smoke in the boiler room.
  • It saves electricity since lower capacity motors will be sufficient for the reducer and fan.
  • It does not require intervention in the boiler room in case of a power cut.
Order Now
Contact Us